GSi COMPETITOR 2000 Series, Руководство по эксплуатации и обслуживанию

Страница: 11 / 53

11
DRYER CONTROL PANEL
SERIES 2000
CONTROL SYSTEM
TURNING ON THE
SERIES 2000 CONTROL
SYSTEM
The 2000 Control System controls
all timing functions and safety cir-
cuit checks. It is designed to sim-
plify dryer operation by providing
messages and warnings on its liq-
uid crystal display (LCD).
Turn the control power switch to on.
The monitor will display "GSI" and the
current software version number.
SETTING THE DRY, COOL,
UNLOAD AND OUT OF
GRAIN TIMERS
These switches are used to set the
cycle times in the staged batch dry-
ing mode only. The drying mode
switch must be in the staged batch
position. Out of grain sets the length
of time the dryer will run before shut-
ting down when the load switch is in
the auto position. To change the set-
ting of these timers follow these in-
structions:
1. Press the PROGRAM (TIMERS)
The Airstream Competitor 2000 Series Dryer Control Panel.
button until the "carrot" is above
the timer you want to modify.
2. Use the up and down arrow keys
to change from the present time
to the desired setting. The new
time is automatically accepted.
3. Keep pressing the PROGRAM
(TIMERS) button until the car-
rot disappears or press the
mode select button once to exit.
During the operation the remaining
time on each timer is displayed on
the screen. If the power goes out or
if the dryer is stopped, these times
are saved by the controller. When
The dryer LCD display.