GSI Group 890-00584, Руководство по установке и настройке

Страница: 10 / 120

Chapter 1: General Overview
FCC compliance statements
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
this equipment (phone card, model : PCB402 (300-00319)) inside the AA128 Touch enclosure is a label
that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
ACTA number: US:32ZCN01BGSIE0001 REN: 0.1B
It is designed to be connected to a compatible modular (USOC Jack Type : RJ11) jack that is also compli-
ant. See installation instructions for details.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant tele-
phone cord and modular plug is not provided with this product. It is designed to be connected to a compati-
ble modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Exces-
sive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devi-
ces that may be connected to a line, as determined by the total RENs, contact the local telephone com-
pany. For products approved after July 23, 2001, the REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal
point (e.g., 01B is a REN of 0.1B). For earlier products, the REN is separately shown on the label.
If this equipment (phone card, model : PCB402 (300-00319)) causes harm to the telephone network, the
telephone company will notify you in advance that temporary discontinuance of service may be required.
But if advance notice isn't practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment (phone card, model : PCB402 (300-00319)), for repair or war-
ranty information, please contact GSI Electronics Inc. at 1-877-926-2777 If the equipment is causing harm
to the telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved. This product is not intended to be repaired. A troubleshooting guide is available in the
troubleshooting section of this manual.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
If your barn has specially wired alarm equipment connected to the telephone line, ensure the installation of
the AA128 Touch through the phone card, model : PCB402 (300-00319)), does not disable your alarm
equipment. If you have questions about what will disable alarm equipment, consult your telephone com-
pany or a qualified installer.
OEM devices
The phone card, model : PCB402 (300-00319) is intended to use only with the AA128 Touch.
10 895-00677 Agri Alert 128 Touch