13
Adding Door Controls
12
Enrolling Door Controls
Step Description
1 Click the Doors Icon on the left hand toolbar (see 1 above)
2 Click ‘Add New Door’ (see 2 above)
3 The Door is added to the Controller.
4
Configure the required Door settings : Door Timers, Alarm Options,
Door Options, Timed Actions, Inputs & Outputs.
5 Click ‘Save’ to transmit the changes to the GSD Controller.
(see 5 above)
1
2
5
Assigning a Door Address on Wireless Network
Step Description
1 On the Controller screen: Click ‘Wireless Network’ and then
Click ‘Allow Doors to Join’
All Door Controls that don’t have an address start to beep out the next
available address.
2 Hit any key on the ‘beeping’ Door Control to assign this address or
present a Card on the ‘beeping’ Proximity unit to assign this address.
When a Door Control is assigned an address, all unassigned Door
Controls will start to beep the next available address.
3 When all doors are assigned: Click ‘Secure Network’
Note: While assigning door addresses, leave the Controller Screen open or the
network will be Secured automatically , stopping doors from joining the network.
Assigning a Door Address on a Wired 485 Network
Step Description
1 Right Click on the Controller Icon & select ‘Manually Assign Addresses’
Follow Step 2 above to complete the process.
Enrolling Door Controls
