29
Instruction
GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
2. Now you can lift the collector box and slide it on the mounting supports.
(see Illustration 3)
Illustration 3
Illustration 4 (The final result)
The distance between the lower side of the collector box and the sweeping surface
(ground clearance) can be adjusted by means of the turning handles. (see Illustration
6)
After mounting the collector box, you must adjust this distance to +/- 20 mm (see
Illustration 5). Depending on the material to be swept, you can place the collector box
a little higher if necessary.
Illustration 5
Illustration 6
