25
Instruction
GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
4. Maintenance and Control
4.1 Inspection before starting to work with the GS 1010.
Before starting any activity, several points must be checked first:
- check whether the machine is in good condition. For instance: check if there are
any loose parts due to vibration
- check the air pressure of the tyres (0.8 bar)
- check if there are no persons or animals in the immediate surroundings of the GS
1010.
A visual inspection is enough. After prolonged use, lengthy standstill of more than 30
days and unexpected circumstances, the sweeper must be thoroughly checked.
Bolts and nuts must be checked regularly for tightness
4.2 Maintenance after sweeping
After sweeping, the machine can be cleaned with water. The use of a high-pressure
spraying device is allowed. During cleaning, the engine of the GS 1010 must be
turned off.
During cleaning, the engine of the sweeper must be turned off.
4.3 Brush check
Depending on the use, the brush hairs are liable to wear. It also occurs that hairs are
being pulled loose in the sweeping process.
As a result, it could be necessary to adjust the height of the brush. In case of severe
wear, parts where a lot of hairs are missing from the brush or poor sweeping results,
the brush must be replaced.
