13
Instruction
GS 1010
GS Engineering B.V.
manufacturer hydraulic sweepers
Before the operator starts the engine, the machine must be checked
and found in good order.
Upon starting the engine, the brush drive must be turned off. First
turn off the brush, otherwise unexpected and dangerous situations
might arise.
Follow the procedure below to start the
Honda GX 200
:
1. Check if the brush drive is turned off. Put the sweeper switch
in neutral.
2. Put the accelerator lever in its top position indicated by the
hare. (Illustration 1)
Illustration 1
3. Use the choke. (Illustration 2)
(Illustration 2)
Closed
