34
SATELLITE RECEIVER
______________________________________________
Recording television programs from the
satellite receiver
1
Select the channel position »AV« on the television for the
video recorder.
2
Insert a cassette with enough playing time and the erase-
protection tab intact into the tape compartment of the video
recorder.
3
Switch on the satellite receiver and select the required sta-
tion.
4
Press »
0
« and then »
–
« to select the channel »
AV 2
«.
5
To start recording, press »
●
« and briefly hold it down.
6
End recording with »
■
«.
Note:
To set the VCR to record satellite programs, see the exam-
ples on Pages 24 and 26.
Recording – controlled by a satellite
receiver
If a satellite receiver is connected to the »
AV2 (DEC./EXT.)
«
socket on the video recorder, and the receiver has a switch
timer, you can use it to control video recording.
1
Insert a cassette with enough playing time and the erase-
protection tab intact into the tape compartment of the video
recorder.
2
Switch off the video recorder by pressing »
Ǽ
«.
3
To prepare recording stand-by, press »
II
« and briefly hold
it down.
– Video recorder dispay: »
A S r
« and the current time.
– The video recorder is in recording stand-by mode. Recor-
ding is controlled by the satellite receiver.
4
Exit the function by pressing »
II
«.
Note:
You cannot select this type of recording if you have already
programmed recordings using the » TIMER« menu.
