6.4 Simple Pulse Counting
Lead the events to channel “A” [10]. Select the function “TOT” (simple pulse counting) with
the button “FUNCTION” [4]. The selection of a measuring time (GATE TIME) does not
influence the counting of simple pulses. After actuating the button “MEAS/LOCAL” [7] all
counting decades are reset and the counting process is started. The simple pulse counting runs
constantly and can only be interrupted by pressing one button ([4], [5], [6]) or started again by
pressing [7].
6.5 Error Messages
The measuring decades can be overflown in some cases due to unfavourable selection of the
measuring range (GATE TIME). In this case the faulty result is not displayed but the error
message “ERR: OVERFLOW !” is displayed.
15
Operating Instructions UZ 2400
1/2000
