9
SET-UP
The Navigator
This is the quick menu selection device
Base unit connection
Before making connections read the safety instructions located at
the start of this booklet.
Insert the telephone point into its housing at the rear face of the
base unit and connect the other end of the lead to the telephone
wall point.
Connect the end of the mains power unit lead to the rear of the
base unit and the mains power unit to a mains power supply. The
base will emit an audible tone.
Pass the wires through the cable guide and place the base in its
desired location.
Quick phonebook
access / Navigate to
menus below
Quick access to list of calls
made / Navigate to menus
above
Speaker key /
Answering machine
rapid access key
R key / Navigate to
menus to the right
Mains point
Telephone point
