ENGLISH
32
SETTINGS
Base unit settings
This function allows you to set the functions which relate to the
base unit.
Change PIN
Remove HS
Default BS
Flash Time
Pause Time
Call log
Auto-Delete
Changing your PIN code
This function is used to protect your settings against unauthorised
access; you can assign a personal identification PIN number
(0000 factory default setting).
Remark:
Ensure that you remember the PIN number; it will
be required should you wish to change certain
settings.
Go to »
Menu
« / »Settings« / »Base Set« / »Change PIN«.
Enter the new PIN, confirm using the »OK« key.
Enter the new PIN once more, confirm using the »OK« key.
Remark
:
in the event of an error during entry the last number
can be deleted by pressing the »
« key.
Removing a handset
This function allows you to remove a handset from your base
unit. This may be necessary if a handset is lost or if you already
have 5 handsets assigned to the base unit.
Go to »
Menu
« / »Settings« / »Base Set«.
Select »Remove HS« using the »
« or »
« keys.
the numbers of the handsets registered on the base unit appear
on the display.
Enter the number of the handset that you wish to remove.
The removed handset will show "Non-Subscription" until it is
registered once again.
_ _ _ _
Change PIN
Esc
OK
Enter New PIN
1 2 3 4 5
Remove HS
Esc
Unregistered
