ENGLISH
10
SET-UP
Inserting batteries in the handset
Open the battery compartment cover.
Place the new batteries in the compartment.
Make sure that the polarity is correct!
Close the compartment.
Remove the protective film from the display, place the handset in
the base unit in order to fully charge the batteries.
The charging icon is activated on the display and shows you the
charging status. When the icon is full your batteries are fully
charged.
Worn out batteries must be disposed of in accordance with the
recycling instructions given in paragraph Environment of this
booklet.
Use only approved rechargeable AAA format NiMH type 1.2 V
650 mAh batteries. In order to ensure optimum charging, when
first used leave the handset on the base unit for at least 12 hours.
During charging batteries may become warm. This is quite
normal and is not dangerous.
Operating time of the batteries
The operating time of the batteries in standby is up to five days
or up to ten hours for longer calls.
Service life of the batteries
To increase the service life of the batteries, note the following:
- Do not short-circuit the plug.
- Use your handset as a mobile phone and do not replace it in
the base station or charger (accessories) to be charged after
every phone call.
+
+
Direction of insertion
Direction of opening
