Grundig GWN 48230 K, Руководство пользователя

Страница: 85 / 96

85
HR EN
IT
After every washing check that no
foreign substance is left in the drum.
If the holes on the bellow shown in
the figure is blocked, open the holes
using a toothpick.
C
Foreign metal substances
will cause rust stains in
the drum. Clean the stains
on the drum surface by
using cleaning agents for
stainless steel. Never use
steel wool or wire wool.
A
WARNING: Never use
sponge or scrub materials.
These will damage the
painted, chrome plated and
plastic surfaces.
Cleaning the body and
control panel
Wipe the body of the machine with
soapy water or non-corrosive mild
gel detergents as necessary, and dry
with a soft cloth.
Use only a soft and damp cloth to
clean the control panel.
Cleaning the water intake filters
There is a filter at the end of each
water intake valve at the rear of the
machine and also at the end of each
water intake hose where they are
connected to the tap. These filters
prevent foreign substances and dirt
in the water to enter the washing
machine. Filters should be cleaned
as they do get dirty.
• * Close the taps.
•
*
Remove the nuts of the water
intake hoses to access the filters
on the water intake valves. Clean
them with an appropriate brush.
If the filters are too dirty, take
them out by means of pliers and
clean them.
• * Take out the filters on the flat
ends of the water intake hoses
together with the gaskets and
clean thoroughly under running
water.
•
*
Replace the gaskets and filters
carefully in their places and
tighten the hose nuts by hand.