Grundig GWN 48230 K, Руководство пользователя

Страница: 61 / 96

61
HR EN
IT
• * Connect the special hoses
supplied with the product to the
water inlets on the product. Red
hose (left) (max. 90 ºC) is for
hot water inlet, blue hose (right)
(max. 25 ºC) is for cold water
inlet.
A
WARNING: Ensure that
the cold and hot water
connections are made
correctly when installing the
product. Otherwise, your
laundry will come out hot
at the end of the washing
process and wear out.
• * Tighten all hose nuts by hand.
Never use a tool when tightening
the nuts.
• * Open the taps completely after
making the hose connection
to check for water leaks at the
connection points. If any leaks
occur, turn off the tap and
remove the nut. Retighten the nut
carefully after checking the seal.
To prevent water leakages and
damages caused by them, keep
the taps closed when the machine
is not in use.
Connecting to the drain
• • The end of the drain hose must
be directly connected to the
wastewater drain or to the
washbasin.
A
WARNING: Your house
will be flooded if the hose
comes out of its housing
during water discharge.
Moreover, there is risk
of scalding due to high
washing temperatures! To
prevent such situations and
to ensure smooth water
intake and discharge of the
machine, fix the end of the
discharge hose tightly so
that it cannot come out.
•
•
The hose should be attached to a
height of at least 40 cm, and 100
cm at most.