Grundig GSS SMCIP 402 C, Инструкция по сборке

Страница: 11 / 42

- 11 - SMCIP 402 C/T
3.3 C
onneCting the deviCe
P
otential equalisation
(Pe)
Equalise the potential (PE) in accordance with IEC/EN/DIN EN 60728.
• Connect the PE connection terminal 2 to a PE rail (supplied by customer)
using a PE wire (Cu 4 mm
2
- 6 mm
2
).
s
ignal
C
onneCtions
• Connect the SAT IF inputs 8 to the outputs of a multiswitch.
• If necessary connect the ASI input
0
and ASI output
!
to corresponding
external devices.
—> If you would like to integrate the device to an existing plant, now
first you should connect it to the mains and perform all settings
(page 18). Therefore especially observe the notes on frequency set-
ting (page 17) and level setting (page 17).
—> In this case the new transponder should work at a unused channel.
• If the programming is finished connect the RF output 9 to your antenna
network.
• Connect the device to the mains power supply.