Grundig GSS SMCIP 402 C, Инструкция по сборке

Страница: 32 / 42

- 32 - SMCIP 402 C/T
lnb
osCill ator frequenCy
/
Control voltage
In this menu set the oscillator frequency of the LNB used and, if necessary, a
LNB control voltage.
LNB
–––Hl
A
9750 MHz
LNB oscillator frequency:
• Using button MULTI you can toggle the customary standard values
9750/10600 MHz.
• For deviating values use the buttons </> to position the cursor under the
digit to be set for the displayed oscillator frequency.
• Press the +/– buttons to enter the corresponding digit of the oscillator fre-
quency of the LNB used.
• Repeat the procedure by the quantity of the digits to be set.
DiSEqC commands:
• In order to set a DiSEqC command, position the cursor under "off" using
button > .
• Using buttons +/– to select the desired control voltage.
"abc" are place-holders for the following setting options:
LNB
abc
A
9750 MHz
Place-holder Value Description
a _ No function
TA, TB Sound burst satellite A/B
S01…16 Satellite (DiSEqC position)
b H Horizontal polarisation
V Vertical polarisation
c h High-Band
l Low-Band
Example: S10Hh means S atellite 10 (DiSEqC position 10), H orizontal h igh
—> The control voltage only serves to control multiswitches and is not
suitable for power supply of upstreamed components (maximum
load 65mA).