Grundig GSS SMCIP 402 C, Инструкция по сборке

Страница: 21 / 42

- 21 - SMCIP 402 C/T
—> The "Output mode" – " OUTPUT " menu is activated.
• Press the
MODE
button.
—> The "Output parameter" – " OUTPUT " menu is activated.
o
utPut mode
The output transport stream is transferred to the ASI output as well as to the
modulator. The maximum possible output data rate is dependent on the output
parameter settings (max. 50.8 Mbit/s resp. 31.6 Mbit/s)!
OUTPUT
RF + ASI
If only the ASI output is needed, the modulator can
be switched off. Then the maximum possible ASI
output data rate is 108 Mbit/s.
• Using buttons +/– select the desired output mode.
RF+ASI: RF and ASI outputs are working in parallel, the output data rate is
dependent on the DVB-S output parameter settings.
ASI (108MBit): Modulator is switched off, the max. ASI output data rate is
108 MBit/s.
• Press the
MODE
button.
—> If ASI (108MBit) is selected:
The "ASI input selection" main menu – " ASI " is activated (page 31).
—> If RF+ASI is selected:
The "Output parameter" – " OUTPUT " menu is activated.