Grundig GSBS16312B, Инструкция пользователя

Страница: 40 / 60

40
5.16 Ice-maker
(Optional)
Ice maker is located on the upper
section of the freezer cover.
Hold the handles on the sides of the
ice stock reservoir and move up to
remove.
Remove the ice-maker decorative lid
by moving up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir
from the handles, then move up
and pull the ice stock reservoir.
(Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir
from the handles, move up with
an angle to fit the sides of the
reservoir to their slot and make
sure that the ice selector pin is
mounted properly. (Figure 2)
Push downwards firmly, until
there is no space left between
the reservoir and the door
plastic. (Figure 2)
If you have difficulty in refitting
the reservoir, turn the rotary
gear 90° and reinstall it as
shown in the figure3.
Any sound you hear when the
ice drops into the reservoir is a
part of normal operation.
When the ice dispenser does
not work properly
If you do not remove ice cubes
for a long time, they will cause
formation of ice chunks. In this
case, please remove the ice
stock reservoir in accordance
with the instructions given
above, seperate the ice chunks,
discard the inseparable ice and
put the ice cubes back into the
ice stock reservoir. (Figure 4)