Grundig GCI-F1576V, Руководство пользователя

Страница: 52 / 107

9.8.3. Network failure detection
The Network Failure Detection function allows the IP Camera to ping another IP device (e.g. NVR, VSS, Video
Server, etc.) within the network periodically and generates some actions in case of network failure occurance, for
instance, when a Video Server is somehow disconnected.
Being capable of implementing local recording (through Micro SD card) or the remote recording (via NAS) when a
network failure happens, the IP Camera can be a backup recording device for the surveillance system.
Detection Switch :
The default setting for the Detection Switch function is <Off>. Enable this function by selecting <On>. Users can
also activate the function according to the schedule time that is was previously set in the <Schedule> setting
page. Select <By schedule> and click <Please select…> to choose the desired schedule from the drop-down menu.
Detection Type :
Here you can set an IP address that should be pinged in order to detect network failure. Please also set the
interval (in minutes) for this pinging.
The ping time setting range is from 1 to 99 minutes.
Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when Network Failure is detected. All options are
listed as follows:
- Enable Alarm Output:
Check this item and select the predefined type of alarm output to enable alarm relay output when network failure
is detected.
50 English