Grundig GCI-C0735P, Руководство пользователя

Страница: 24 / 74

- Secondary DNS:
Secondary DNS is a secondary domain name server that backups the primary DNS.
Use PPPoE :
For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on the “Save” button to
complete the setting.
Advanced :
- Web Server port:
The default web server port is 80. Once the port is changed, the users must be informed about the change for the
connection to be successful. For instance, when the Administrator changes the HTTP port of the IP Camera
whose IP address is 192.168.0.100 from 80 to 8080, the users must type in the web browser
“http://192.168.0.100:8080” instead of "http://192.168.0.100".
- RTSP port:
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
- MJPEG over HTTP port:
The default setting of MJPEG over HTTP Port is 8008; the setting range is from 1024 to 65535.
NOTE: Be aware to choose a different port from the one set for the web server port.
UPnP Setting :
- Enable UPnP:
When the UPnP is enabled, whenever the IP Camera is presented to the LAN, the icon of the connected IP
Cameras will appear in My Network Places to allow for direct access as shown below.
NOTE: To enable this function, please make sure the UPnP component is installed on your computer. Please
refer to chapter 16. Install UPnP Components for UPnP component installation procedure.
- Enable UPnP port forwarding:
When the UPnP port forwarding is enabled, the IP Camera is allowed to open the web server port on the router
automatically.
NOTE: To enable this function, please make sure that your router supports UPnP and is activated.
- Friendly name:
Set the name for the IP Camera for identity.
22 English