Grundig GCH-K0274P, Руководство пользователя

Страница: 24 / 40

RUN AUTOPAN:
After all settings related to Auto-Pan are completed, select this item to execute the Auto-pan function. Press the
<CAMERA MENU> key (ENTER) to run an Auto-Pan path.
EXIT:
Exit the AUTOPAN setup menu and go back to MAIN PAGE 2 to set up a cruise.
NOTE: Users can execute the Auto Pan function through a keyboard. Please refer to the control keyboard’s quick
guide for further information.
5.3.15. CRUISE
CRUISE is a route performed through manual operation, i.e. through adjusting the pan and tilt position manually.
A saved Cruise can be recalled repeatedly, which means this Cruise can be executed time and time again when
necessary.
CRUISE LINE:
Up to eight cruise lines can be configured in this Camera.
Please use the LEFT/RIGHT direction keys to first
select a line and then follow the steps below to start recording the cruise path.
RECORD START:
Follow the description below to record a CRUISE path.
STEP 1:
Rotate the Dome Camera to a desired view area (for some protocols, users may need to do it before entering
the OSD menu), and press <ENTER> to perform a cruise path using the joystick on the control device. The already
used up percentage of the memory buffer will be displayed on the screen.
STEP 2:
Pan and tilt the Dome Camera to form a path.
NOTE: Beware of the memory size when building a Cruise route. Once the buffer percentage reaches 100%, the
recording of the path will stop.
RECORD END:
The cursor will be moved to RECORD END while creating the cruise line; when the setting is completed, press
<ENTER> to save the path.
RUN CRUISE:
After the cruise setting is completed, press the <CAMERA MENU> key (ENTER) to run the defined Cruise path.
EXIT:
Exit the CRUISE setup menu and go back to MAIN PAGE 2 to set up a home setting.
NOTE: Users can also execute the cruise function through a keyboard. Please refer to the control keyboard’s
quick guide for further information.
22 English