Grundig GCH-K0274P, Руководство пользователя

Страница: 18 / 40

- EXIT & SET:
Exit the <ANGLE ADJUSTER> menu and go back to <SETUP MENU 2> to set other functions.
PT POSITION:
PT Position can display the Pan/Tilt position of the Dome Camera on the screen.
- PT DISPLAY:
Turn the item to <ON> to display the pan/tilt position on the screen. The display format will be “XX YYY/ YY”.
- SET PAN ZERO:
By using the <SET PAN ZERO> function, the user can set the north direction as coordinate zero.
The display will show eight different directions including N, E, S, W, NE, SE, SW, SN depending on the closest
direction which the Dome Camera faces. The PAN range is from 0° to 359°, and the TILT range is from 10° to -
90°. After lower than -90°, the PAN degree will be automatically added 180°.
Press <TO SAVE> to save the pan zero setting.
- EXIT & SET:
Exit the <PT POSITION> menu and go back to <SETUP MENU 2> to set other functions.
SPEED BY ZOOM:
If this item is set to <ON>, the pan/tilt speed will be adjusted by an internal algorithm when zooming
automatically. A larger zoom ratio leads to a lower rotation speed.
AUTO CALI. (Auto Calibration):
There is one horizontal and one vertical infrared ray check point in each dome. When the dome camera’s position
is moved during installation or maintenance, the relative distance between the original set point and the check
point can change. Enable the Auto Calibration function, so that the dome will automatically detect the distance
change and reset the point back to the original position.
16 English