Grundig 55 VLX 8572 BP, Инструкция пользователя

Страница: 113 / 125

113­ ENGLISH
INFORMATION
­-------------------------------------------------------------------------------------------------
Network­interfaces
This product is intended for connection to the
ADSL network.
Disposing­of­the­packaging
The packing materials are dangerous for chil-
dren. Keep the packing materials out of the
reach of children.
The packing of your product is manufactured
from recyclable materials. Dispose by classifying
in accordance with waste instructions. Do not
dispose along with normal household waste.
Environmental­note
This product has been made
from high-quality parts and
materials which can be re-used
and recycled.
Therefore, do not dispose of the product with
normal household waste at the end of its life.
Take it to a collection point for recycling electri-
cal and electronic devices. This is indicated by
this symbol on the product, in the operating
manual and on the packaging.
Please find out about collection points operated
by your local authorities.
Help protect the environment by recycling used
products.
Explanation­of­the­symbols­
which­may­be­present­on­back­
side­of­the­television­set
Class II or Double insulation.
Television set doesn’t require
connection to electrical earth
(ground).
Alternating current. The set
works only with AC line volt-
age in your household electric-
ity.
Direct current. The set works
only with AC/DC adapter.
For­the­customers­in­Russia
Short Range Device with FHSS Modulation
Applications.
Maximum 2.5 mW e.i.r.p.
for collecting telemetry information for auto-
matic tracking and source calculation systems,
100mW e.i.r.p is the maximum allowed short
range device density value permitted for use on
outdoor applications without any limitation on
installation height. For uses with other purposes,
this applies to outdoor application in which this
value does not exceed 10m above the ground.
Short range device density for indoor applica-
tions is 100mW e.i.r.p maximum.
Short range device applications with broad-
band modulation with DSSS and other than
FHSS.
The maximum average density value for short
range device applications with broadband
modulation with DSSS and other than FHSS is
100mW e.i.r.p.
For only the purpose of compiling telemetry
data for automatic monitoring and source
estimation systems, maximum short range device
allowed to be used in outdoor applications is
20 mW/MHz or 100 mW e.i.r.p.
Maximum density value for indoor use of short
range devices is 10mW/MHz or 100 mW
e.i.r.p.
For­the­customers­in­Ukraine
Maximum short range device density value for
indoor uses, along with internal antenna with 6
dBi amplification factor, is 100 mW e.i.r.p.