EN
GLISH
53
Inserting the CA module
Note:
Switch off the appliance before inserting the CA module in the
»
CI
« slot.
1
Insert the smart card into the CA module.
2
Insert the CA module with the smart card into the »
CI
« slot on the
television.
Note:
To see which CA module is in the Common Interface slot, go to
the »CA - Module« submenu.
Access control for CA module and smart card
1
Open the menu with »
MENU
«.
– The »PICTURE« menu is displayed.
2
Select the »CHANNEL SETUP« menu with »
r
« or »
e
« and con-
firm with »
OK
«.
3
Select »CA–Module« with »
q
« or »
w
« and press »
OK
« to
confirm.
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CA
module and smart card.
4
Press »
MENU
« to finish the settings.
OPERATION WITH COMMON INTERFACE
CHANNEL SETUP
Auto Tuning
Digital Manual Tuning
Analogue Manual Tuning
Programme Table
Signal Information
CA - Module
IRDETO ACCESS
Select
Back
Exit
Active Antenna Power
On
s
s
s
s
02Vision 2 19-2930T DVD_en:Layout 1 04.09.2009 9:03 Uhr Seite 53