background image

English (GB)

16

9.1 Repairing a non-return valve

1. Open the valve chamber drain valve by means of the valve 

handle in the pit in order to empty the sump of the valve 
chamber. See fig. 

28

.

2. Close the isolating valves. See fig. 

8

.

3. Loosen and remove the two screws on the non-return valve 

cover. See fig. 

29

.

4. Replace worn-out valve balls and clean valves inside.
5. Close the valve cover and tighten the screws.
6. Open the isolating valves. See fig. 

8

.

7. Close the drain valve inside the pit. See fig. 

28

.

Fig. 28

Drain valve

Fig. 29

Non-return valve

9.2 Contaminated pumps

For further information, see the installation and operating 
instructions for the pump.

9.3 Service contract

It is possible to make a service contract with Grundfos.

10. Disposal

This product or parts of it must be disposed of in an 
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company 

or service workshop.

3. If it is not possible to dispose of the product as a complete 

unit, the pump and installation equipment can be removed 
from the pit, and the pit can be filled and covered.

See also end-of-life information on www.grundfos.com.

Subject to alterations.

CAUTION
Pressurised system

Minor or moderate personal injury
- Relieve the pressure by draining the system before 

dismantling the non-return valve.

CAUTION
Biological hazard

Minor or moderate personal injury
- Remove the fuses or switch off the main switch 

before dismantling the non-return valve.
Make sure that the power supply cannot be 
accidentally switched on.

CAUTION
Biological hazard

Minor or moderate personal injury
- Rinse the non-return valve thoroughly with clean 

water before carrying out maintenance and 
service.

Make sure the isolating valves cannot be accidentally 
opened.

When entering the valve chamber, do not step on 
pipes or valves

TM

0

6

 1

755

 2

714

Valve handle

Drain valve

TM0

6

 175

2

7

1

4

CAUTION
Biological hazard

Minor or moderate personal injury
- Flush the pump thoroughly with clean water and 

rinse the pump parts in water after dismantling.

Non-return valve

Non-return valve, 

exploded view

Содержание PS.R Series

























Отзывы: