23
17. Setting by means of the control panel
17.1 Control panel
The control panel is used for local setting of the CUE. The
functions available depend on the pump family connected to the
CUE.
Fig. 47
Control panel of the CUE
Editing buttons
Navigating buttons
The editing buttons of the control panel can be set to these
values:
•
Active
•
Not active
.
When set to
Not active
(locked), the editing buttons do not
function. It is only possible to navigate in the menus and read
values.
Activate or deactivate the buttons by pressing the arrow up and
arrow down buttons simultaneously for 3 seconds.
Adjusting the display contrast
Press OK and + for darker display.
Press OK and – for brighter display.
Indicator lights
The operating condition of the pump is indicated by the indicator
lights on the front of the control panel. See fig. 47.
The table show the function of the indicator lights.
Displays, general terms
Figures 48 and 49 shows the general terms of the display.
Fig. 48
Example of display in the start-up guide
Fig. 49
Example of display in the user menu
17.2 Back to factory setting
Follow this procedure to get back to the factory setting:
1. Switch off the power supply to the CUE.
2. Press On/Off, OK and + while switching on the power supply.
The CUE will reset all parameters to factory settings. The display
will turn on when the reset is completed.
Warning
The On/Off button on the control panel does not
disconnect the CUE from the power supply and
must therefore not be used as a safety switch.
The On/Off button has the highest priority.
In "off" condition, pump operation is not
possible.
T
M
03 8719 2507
Button
Function
Makes the pump ready for operation/starts and
stops the pump.
Saves changed values, resets alarms and expands
the value field.
Changes values in the value field.
Button
Function
Navigates from one menu to another. When the
menu is changed, the display shown will always be
the top display of the new menu.
Navigates up and down in the individual menu.
On/
Off
+
-
CUE
>
>
>
>
OK
On/
Off
On
Off
Alarm
On/
Off
OK
+
-
>
>
> >
Indicator
light
Function
On
(green)
The pump is running or has been stopped by a
stop function.
If flashing, the pump has been stopped by the
user (CUE menu), external start/stop or bus.
Off
(orange)
The pump has been stopped with the On/Off
button.
Alarm
(red)
Indicates an alarm or a warning.
Display name
Current display / total number
Value field
Display name
Display number, menu name
Value field
Grundfos.bk Page 23 Friday, July 30, 2010 10:10 PM
40
Grundf
os CU
E
