7
11. Identification
11.1 Nameplate
The CUE can be identified by means of the nameplate.
An
example is shown below.
Fig. 1
Example of nameplate
11.2 Packaging label
The CUE can also be identified by means of the label on the
packaging.
12. Mechanical installation
The individual CUE cabinet sizes are characterised by their
enclosures. The table in section
16.1
shows the relationship of
enclosure class and enclosure type.
12.1 Reception and storage
Check on receipt that the packaging is intact, and the unit is
complete. In case of damage during transport, contact the
transport company to complain.
Note that the CUE is delivered in a packaging which is not
suitable for outdoor storage.
12.2 Transportation and unpacking
The CUE must only be unpacked at the installation site to prevent
damage during the transport to the site.
The packaging contains accessory bag(s), documentation and
the unit itself. See fig. 2.
Fig. 2
CUE packaging
12.3 Space requirements and air circulation
CUE units can be mounted side by side, but as a sufficient air
circulation is required for cooling these requirements must be
met:
•
Sufficient free space above and below the CUE.
See table below.
•
Ambient temperature up to 122 °F.
•
Hang the CUE directly on the wall, or fit it with a back plate.
See fig. 3.
Fig. 3
CUE hung directly on the wall or fitted with a back
plate
Required free space above and below the CUE
T
M
04 32
72 380
8
Text
Description
T/C:
CUE (product name)
202P1M2... (internal code)
Prod. no:
Product number: 12345678
S/N:
Serial number: 123456G234
The last three digits indicate the production date:
23 is the week, and 4 is the year 2004.
1.5 kW
Typical shaft power on the motor
IN:
Supply voltage, frequency and maximum input
current
OUT:
Motor voltage, frequency and maximum output
current. The maximum output frequency usually
depends on the pump type.
CHASSIS/
IP20
Enclosure class
Tamb.
Maximum ambient temperature
T/C: CUE202P1M2T5E20H1BXCXXXSXXXXAXBXCXXXXDX
Prod. no: 12345678
S/N: 123456G234
IN: 3x380-500 V 50/60Hz 3.7A
OUT: 3x0-Vin 0-100Hz 4.1 A 2.8 kVA
CHASSIS/IP20 Tamb. 45C/122F
IIIIIIIIIIIBAR CODEIIIIIIIIIII
MADE IN DENMARK
Listed 76X1 E134261 Ind. Contr. Eq.
See manual for prefuse
CAUTION:
SEE MANUAL / VOIR MANUEL
WARNING:
STORED CHARGE DO NOT TOUCH UNTIL
4 MIN AFTER DISCONNECTION
CHARGE RESIDUELLE, ATTENDRE
4 MIN APRES DECONNEXION
1.5 kW (400V)
T
M
03 88
57 26
07
T
M
0
3 8859
2
60
7
Enclosure
Space [in]
A2, A3, A5
3.9
B1, B2, B3, B4, C1, C3
7.9
C2, C4
8.9
Accessory
bag(s)
Documentation
Grundfos.bk Page 7 Friday, July 30, 2010 10:10 PM
24
Grundf
os CU
E
