5.4.5 Menus
There are two menus in the controller:
•
settings menu
•
information menu
Settings menu
Menu
Designation
Description
L_01
Start level
Set the start level in this menu.
I_02
Rated current
Set the rated current.
T_01
Stop delay
Set a stop delay for the pumps.
T_02
Start delay
Set a start delay for the
pumps.
T_03
Alarm delay
Set an alarm delay for the sys-
tem.
M_01
Maintenance interval
Set the maintenance interval to
0, 3, 6 or 12 months. To disa-
ble the function, set the interval
to 0 months.
A_01
Resetting of alarms
Select manual or automatic re-
setting of alarms.
G_01
Resetting to factory settings
-
Exit
Exit
Go back to the main menu.
Information menu
Menu
Designation
Description
F_01
Fault log
The fault log shows the latest
20 faults.
R_01
Hours counter [h]
The hours counter shows the
number of operating hours.
R_02
Impulse counter
The impulse counter shows the
number of starts.
R_03
Motor current [A]
The motor current is the aver-
age of the last 20 measure-
ments.
Exit
Exit
Go back to the main menu.
5.4.6 Factory settings
Function
Factory setting
Start level
Not set from factory.
Rated current
Not set from factory; to be set according to the motor nameplate.
Stop delay
1 second
Start delay
0 seconds
Alarm delay
5 seconds
Maintenance interval 0 months
Multilift MD1, MDV | |
23
