Instructions
EZ Boost
TM
System
EZ Boost Quick Select Guide
3. EZ Boost Quick Select Guide (below)
Example:
1. The maximum demand is 15 GPM (3.4 m3/h).
2. The pressure required is 70 PSI system pressure
at the taps in the building.
3. The normal minimum inlet pressure (e.g. city
pressure) is 20 PSI.
4. Select a 15 BMQE 05A-110.
4.3. EZ Boost Quick Installation Guide
FOR MORE DETAILED INSTALLATION INSTRUCTIONS, PLEASE
GO TO SECTION 6.
1. Install BMQE pump:
1. Install BMQE pump.
2. Install EZ Boost controller.
PE
PE
POWER
PUMP
1
2
3 4
+24V
IN
GN
D
SENSOR
1
2
3
4
2. Install EZ Boost controller.
3. Install diaphragm tank.
3. Install diaphragm tank.
4. Install pressure sensor.
4. Install pressure sensor.
Note:
The BMQE pump must be installed with the air relief vent
in the 12 o’clock position when installed horizontally, and when
installed in the vertical position, the air vent must be at the top
of the unit.
Insert BMQE pump into the
open mounting bracket.
Secure mounting brackets.
Apply pressure to the BMQE
pump until the mounting
bracket jaws close and lock.
1a. Secure mounting brackets
Insert BMQE pump into the
open mounting bracket.
Secure mounting brackets.
Apply pressure to the BMQE
pump until the mounting
bracket jaws close and lock.
1b. Insert BMQE pump into the open
mounting bracket.
Insert BMQE pump into the
open mounting bracket.
Secure mounting brackets.
Apply pressure to the BMQE
pump until the mounting
bracket jaws close and lock.
1c. Apply pressure to the BMQE pump
until the mounting bracket jaws close
and lock.
4
