Grundfos CONTROL MPC, Инструкция по установке и эксплуатации

Страница: 12 / 68

English (GB)
12
8.2 Overview
Section Display and display number See page
8.4 Status (1)
14
8.4.1 Actual alarms (3.1)
14
8.4.2 System (1.2)
15
8.4.3 Operating mode (1.2.1)
15
8.4.4 Setpoint (1.2.2)
15
8.4.5 Setpoint influence (1.2.3)
16
8.4.6 Measured values (1.2.4)
16
8.4.7 Analog inputs (1.2.5)
16
8.4.8 Log graph (1.2.6)
16
8.4.9 Battery status (1.2.7)
17
8.4.10 Pump 1 - 6, Pilot pump, Backup pump (1.3 - 1.10)
17
8.5 Operation (2)
18
8.5.1 Operation (2)
18
8.5.2 System operating mode (2.1.1)
18
8.5.3 Control mode (2.1.2)
19
8.5.4 Alternative setpoints (2.1.3)
21
8.5.5 Individual pump control (2.1.4)
21
8.5.6 Pump 1 - 6 (2.1.4.1 - 2.1.4.6)
22
8.5.7 Operation, pilot pump (2.1.4.7)
22
8.5.8 Operation, backup pump (2.1.4.8)
23
8.6 Alarm (3)
24
8.6.1 Alarm status (3)
24
8.6.2 Actual alarms (3.1)
25
8.6.3 Alarm log (3.2)
25
8.6.4 Service contact information (3.3)
25
8.7 Settings (4)
26
8.7.1 Primary controller (4.1)
26
8.7.2 PI controller (4.1.1)
27
8.7.3 Alternative setpoints (4.1.2)
28
8.7.4 Alternative setpoints 2 - 7 (4.1.2.1 - 4.1.2.7)
28
8.7.5 External setpoint influence (4.1.3)
29
8.7.6 Setting of influence function (4.1.3.2)
30
8.7.7 Primary sensor (4.1.4)
30
8.7.8 Clock program (4.1.6)
31
8.7.9 Proportional pressure (4.1.7)
32
8.7.10 S-system configuration (4.1.8)
32
8.7.11 Setpoint ramp (4.1.9)
33
8.7.12 Pump cascade control (4.2)
33
8.7.13 Min. time between start/stop (4.2.1)
33
8.7.14 Max. number of starts/hour (4.2.1)
33
8.7.15 Standby pumps (4.2.3)
34
8.7.16 Forced pump changeover (4.2.4)
34
8.7.17 Pump test run (4.2.5)
35
8.7.18 Pump stop attempt (4.2.7)
35
8.7.19 Pump start and stop speed (4.2.8)
36
8.7.20 Min. performance (4.2.9)
36
8.7.21 Compensation for pump start-up time (4.2.10)
37
8.7.22 Secondary functions (4.3)
37
8.7.23 Stop function (4.3.1)
37
8.7.24 Soft pressure build-up (4.3.3)
39
8.7.25 Emergency run (4.3.5)
40
8.7.26 Digital inputs (4.3.7)
40
8.7.27 Functions of digital inputs (4.3.7.1)
41
8.7.28 Analog inputs (4.3.8)
41
8.7.29 Analog inputs (4.3.8.1 to 4.3.8.7)
42
8.7.30 Analog inputs and measured value (4.3.8.1.1 - 4.3.8.7.1)
42