Grunbeck softliQ:MD Series, Руководство по эксплуатации

Страница: 69 / 80

Other information
69 | 80
B
A
_
T
D3
-B
M
0
0
2
e
n
_
0
0
4
_
so
ft
liQ
-MD
12 Other information
12.1 Sodium content in the water
When softening water by 1 °dH (0.18 mmol/l), the sodium content increases by approx. 8.2 mg/l.
The German Drinking Water Ordinance specifies that the sodium content of drinking water
must not exceed 200 mg/l.
► Select a soft water hardness with a sodium content less than 200 mg/l.
The local water suppliers will inform you about the sodium content of your raw water.
Sample calculation:
Raw water hardness: 28 °dH (50 °f, 5 mmol/l)
Sodium content in the raw water: 10.5 mg/l
Admissible increase of the sodium content by softening:
● 200 mg/l - 10.5 mg/l = 189.5 mg/l
● 189.5 : 8.2 = 23 °dH (41 °f, 4.1 mmol/l)
The raw water hardness may be reduced from 28 °dH (50 °f, 5 mmol/l) to 5 °dH (9 °f,
0.9 mmol/l).
12.2 Hardness ranges
The hardness ranges were classified according to the German Act on Detergents and
Cleaning Agents.
Hardness range °dH °f
Soft < 8.4 < 15
Medium 8.4 - 14 15 - 25
Hard > 14 > 25
► When dosing cleaning agents, take account of the new hardness range of your
soft water.