Grunbeck softliQ:MD Series, Руководство по эксплуатации

Страница: 64 / 80

Shut-down and restart
64 | 80
B
A
_
T
D3
-B
M
0
0
2
e
n
_
0
0
4
_
so
ft
liQ
-MD
9 Shut-down and restart
It is not necessary to put your product out of operation.
Should you do so nevertheless, please take the information given in the present chapter
into consideration.
9.1 Shut-down
In accordance with DIN 19636-100, your water softeners are regenerated after 4 days, even
if the softening capacity has not yet been exhausted by that time. The stagnation of water is
prevented.
► Leave your product connected to electricity and water.
Should you wish to temporarily shut down your water supply due to a longer period of
absence, proceed as follows:
1. Close the soft water shut-off valve.
2. Leave the raw water shut-off valve open.
3. Keep the water softener connected to power.
» The product remains in an operating state which is considered to be safe with
regard to hygiene and which is admissible according to DIN EN 19636-100.
9.2 Restart
In order to put your product back into operation again, proceed as follows:
1. Open the soft water shut-off valve.
2. Open a water draw-off point for approx. 5 minutes.
» The product is ready for operation.