Filtration/Deacidification
Filter systems GENO-mat KF-Z / MS-Z / AK-Z
Deacidification systems GENO-mat TE-Z
Order no. 035 129 950-inter Edited by: nkes-mrie G:\BA-129950-INTER_035_FILTERANLAGEN_GENO-MAT.DOCX
16
3 | Intended use
The system is adjusted to the water demand to be expected at the
installation site. It is not suitable for considerably differing perfor-
mances. The maximum flow must not be exceeded under any cir-
cumstances.
The system may only be operated if all components are installed
properly. Safety devices must never be removed, bridged or other-
wise tampered with.
Designated application of the system also implies that the infor-
mation contained in these operating instructions and all safety guide-
lines applying at the installation site be observed. Furthermore, the
maintenance and inspection intervals have to be observed.
4 | Design
5-cycle control valve made of red bronze with time-dependent con-
trol via timer. Control valve top with rotating disks to set the back-
wash intervals; cover for protection against splash water and unau-
thorised access.
Exchanger tank made of pressure resistant plastic with fixtures for
water flow control and retention of filter material.
The control unit is interference-free. Power supply by means of a
transformer plug with 1.5 m feed line.
5 | Scope of supply
5.1 Basic configuration
Exchanger tank in double walled plastic housing
Filter materials (quartz gravel, quartz sand, filter sand,
Hydrafin CC 8 x 30, Hydrolit-Ca, Hydroanthrasit H).
Control valve made of red bronze with integrated timer control.
Operation manual
