Grunbeck Delta-p, Руководство по эксплуатации

Страница: 17 / 74

Control unit
17 | 74
BA_
T
D
3-
BM
001e
n_
01
4_D
el
ta-
p.docx
Display GENO-IONO-matic
3
First line
Exchanger tank
At the status level:
The two exchangers in operation are displayed with their number and
remaining capacity.
The eight circle segments each represent 12.5 % remaining capacity.

Residual capacity between 87.5 % and 75 %.

Residual capacity between 50 % and 37.5 %.

Exchanger exhausted.
In the Information menu level:
Remaining capacity and flow rate displayed in the numeric display refer to
the exchanger which has its number displayed.
Transfer valve
Motor transfer valve is running (M) for switching to the next pair of
exchanger tanks; microswitches (S1, S2) are actuated to detect when this
position has been reached.
Drop symbol
Flashes when there is flow at the corresponding turbine water meter 1, 2
or 3.
Flow arrow
Indicates the direction of flow when there is flow between the regeneration
and transfer valves.

First filtrate: Transfer valve -> Regeneration valve; waste water to the
drain.

Salting/slow rinsing: Regeneration valve -> Transfer valve, brine or
water to the exchanger.

Backwashing: Regeneration valve -> Transfer valve, waste water to the
drain.

Filling the brine tank: No water is flowing through this connection,
direction arrow not active.
Regeneration valve
Display during the entire regeneration.
Regeneration step fill brine tank:
Drop symbol flashes when there is flow at the turbine water meter.
Regeneration step - salting:

Symbol appears if the electrolysis-current for chlorine production
(disinfection of the exchanger) is OK.

Motor regeneration valve is running (M) for switching to the next
regeneration step; microswitches (S3, S4, S5) are actuated to detect
when the next regeneration step has been reached

Symbols show the current status