Grunbeck Delta-p Скачать руководство пользователя страница 10

Страница: 10 / 74

Safety

10 | 74

BA_

001e

4_D

lta-

docx

2.5

Responsibilities of the owner-user

Comply with the following specifications to ensure correct and safe function of the product:

● Arrange for only a specialist installer to carry out installation, start-up and

maintenance.

● Have the product explained to you by the specialist installer.

● Only perform activities described in this manual.

● Do not carry out any activities that are explicitly indicated for a specialist installer.

● Only use this product in accordance with its designated application.

● Make sure that the required inspection- and maintenance work is carried out.

● Keep this manual.

2.6

Safety information for the specific system

WARNING:

Risk of contamination of the drinking water in case of incorrect discharge of the

regeneration water

● Health risk due to contamination of the drinking water.

► When installing a discharge line for the regeneration water, do not connect any

devices directly to the drain outlet of the water softener. To install a drain, use
only the supplied black hose to allow the regeneration water to flow to the drain
connection.

WARNING:

Danger of contamination of the drinking water due to prolonged periods of

inactivity of the system without automatic regeneration.

● Bacterial growth in the drinking water.

► Automatic regeneration with disinfection counteracts the bacterial growth. Do not

disconnect the water softener from the power and water supply when you are
absent for longer periods of time.

WARNING:

Danger of drinking water contamination due to stagnation.

● Bacterial growth in the drinking water.

► According to VDI/DVGW 6023, filling the system with raw water prior to starting

the designated operation is prohibited.

Содержание Delta-p











































































Результаты поиска

Содержание Delta-p

Отзывы:

Grunbeck Delta-p, Руководство по эксплуатации, Страница: 10 / 74

Результаты поиска

Содержание Delta-p

Отзывы: