15
Revision date: 01.01.20
GROWSPAN
™
ROUND PREMIUM EXTRA TALL HIGH TUNNELS
Space below is reserved for customer notes.
BASEBOARD INSTALLATION (RECOMMENDED)
Gather the parts
• Treated or recycled plastic lumber (supplied by
customer). RECOMMENDED: 2" X 6".
• 5/16" x 3" Lag Bolts (FAJ117B)
NOTE:
The following procedure describes one way
to install the recommended baseboards. The size
and type of the baseboard you choose may require
the use of alternative steps. When properly installed,
baseboards run the length of the frame.
On the outside of the frame, attach the first baseboard
to the ground posts using the 5/16" x 3" lag bolts. Insert
the lag bolts, from the inside of the shelter, through the
ground posts into the baseboards. Continue adding
baseboards to complete the first run. Splices are made
between posts. Use a short section of baseboard to
secure separate baseboards at a splice.
NOTE:
The boards should be at ground level or slightly
into grade to prevent the shelter from sinking and to
create a seal along the bottom. After installing the
baseboards, continue with these instructions.
Inside of
Shelter
Outside of
Shelter
Ground Level
This baseboard is
not included
with the shipment and must
be supplied by the customer. Treated or recycled plastic
lumber works well for a baseboard.
Recommended dimension: 2" x 6".
LENGTH DETERMINED BY CUSTOMER/CONTRACTOR.
