background image

28

Revision date: 01.01.20

GROWSPAN

  ROUND PREMIUM EXTRA TALL HIGH TUNNELS

Space below is reserved for customer notes.

SHELTER CARE AND MAINTENANCE

Proper care and maintenance of the shelter is important. 

Check the following items periodically to properly maintain 

the shelter:
•  Regularly check the main cover and panels (if 

equipped) to see that these remain tight and in proper 

repair.

•  Check connections and all fasteners to verify that they 

remain tight.

•  Do not climb or stand on the frame at anytime.
•  Remove debris and objects that may accumulate on 

the cover. Use tools that will not damage the cover 

when removing debris.

•  Remove snow to prevent excess accumulation. Use 

tools that will not damage the cover when removing 

snow.

•  Check the contents of the high tunnel to verify that  

nothing is touching the cover or the side panels that 

could cause damage.

•  Check the anchoring system to ensure that all  

components are tight and in good repair.

•  If the shelter is moved, inspect all parts and  

connections before reassembling.

•  For replacement or missing parts, call 1-800-245-9881 

for assistance.

NOTE:

 With the exception of engineered buildings,  

GrowSpan™ shelters and greenhouses 

do not

 have any 

tested loading criteria.

Содержание PB01752R6


































Отзывы: