19
Revision date: 01.01.20
GROWSPAN
™
ROUND PREMIUM EXTRA TALL HIGH TUNNELS
5. At the top center position, secure the panel to the
backside of the end rafter pipe using a fabric clip and a
Tek screw.
6. Moving outward in both directions, continue attaching
fabric clips to secure the end panel to the rafter. Evenly
space the fabric clips and work toward the ground.
ATTENTION:
For each end panel, evenly space the
fabric clips as you work down from the top of the rafter.
Fabric clips are installed on the backside of the rafter to
prevent damage to the main cover when it is installed.
7. Verify that the end panel is in the desired position and
repeat the steps to secure the other end panel to the
frame using the remaining half of the fabric clips.
NOTE:
The end panels may be shipped as untrimmed
rectangular pieces. If so, use scissors to trim the
excess end panel material from inside the frame after
attaching the panels to the end rafters.
ATTACH END PANELS (CONTINUED)
Space below is reserved for customer notes.
