manualshive.com logo in svg

GrowSpan 113577, Руководство пользователя

Поделиться
Скачать
GrowSpan 113577 Скачать руководство пользователя страница 9

9

Revision date: 12.17.14

1

Assembly Instructions

9.  After attaching the ribbon board, secure the 2' section of film (sent with the kit) between the 111613Z144 and the u-channel attach to the side of the 

building used for the main cover and/or roll-up sides. Use the 102198 spring wire sent with the kit for both connections. Install the 2' film and spring wire 

over the roll-up side panel if panel is installed. U-channel supplied with the building may be single or double. Single is shown below.

10. With the film installed, attach the vinyl gutter brackets (113623) 

over the film

 and to the ribbon board using the FA4652 wood screws.

Building Cover

*Secure 2' 

film in channel 

using *102198 

spring wire.

*Secure 2' wide film 

in building u-channel 

using 102198 spring 

wire from kit.

*2' wide film

Secure 

building cover 

in this channel 

using 102198 

spring wire.

*Secure 2' wide film 

in building u-channel 

using 102198 spring 

wire from kit.

Building Cover

*Secure 2' 

film in channel 

using *102198 

spring wire.

*2' Wide 

Film

*113623 bracket to 

board using *FA4652 

wood screws. Remove 

washers from screws if 

needed.

Secure 

building cover 

in this channel 

using 102198 

spring wire.

 *Included with 

rainwater catch 

drain kit.

RAINWATER CATCH DRAIN INSTALLATION (continued)

 *Included with 

rainwater catch 

drain kit.

Содержание 113577














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды