![GrowSpan 113577 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/growspan/113577/113577_manual_2270674012.webp)
12
12
Revision date: 12.17.14
2
Assembly Instructions
SECURE END OF MAIN COVER IN GUTTER
After attaching the gutter components to the building, place the free edge of the building roof cover material inside the gutter and complete the steps that follow.
4
3
1. Pull lower edge of building cover down
and press into the gutter.
4. Remove excess material so cover can
press easily into the gutter and around
gutter bracket.
2. Use a utility knife or similar tool to make
a cut at the first gutter bracket. Cut to the
edge of the cover.
5. Repeat the steps to cut the cover at each
gutter bracket. When complete, press
cover down and into the gutter.
3. Next, cut cover to allow the material to
form around and under gutter bracket.
6. Beginning at 2" in from one end of the
cover, mark a 1" vertical line on the cover
material. Continue marking the cover
throughout its length in 12" intervals. Cut
on each side of each gutter bracket. See
circle in photo above.
6
1
Main Cover
2
Gutter bracket
under cover.
5