background image

3

1.4 Storage safety

* 

Place battery according to signs on packing case. 

* 

Do not put battery upside down or sidelong. 

* 

Store batteries in a place free from direct sunlight and rain.

* 

Keep  batteries at least two meters away from a heat source (such  

               as a radiator).
* 

Avoid contacting with corrosive and organic substances 

               (including gas exposure).
* 

Batteries with deficiencies should be separated from normal 

               batteries by setting wall between or placing in difference fire 
               protection zones.
* 

Ambient temperature ranges between -30℃ to 60℃ during the 

               first seven days, and ranges between-20℃ to 45℃ within six  
               months. Relative humidity ranges between 0%RH-95%RH. 
* 

Keep the storage area dry, clean and well ventilated.

* 

Do not dispose of battery into environment or sewerage. 

               It should be recycled and disposed based on the local legislation 
               and regulations.   

1.5 Transportation Safety

Battery has cleared UN38.3 (Section 38.3 of the sixth Revised Edition of 
the Recommendations on the Transport of Dangerous Goods: Manual 
of Tests and Criteria) and SN/T 0370.2-2009 (Part 2: Performance Test 
of the Rules for the Inspection of packaging for Exporting Dangerous 
Goods). The battery is classified as class 9 dangerous goods, and is 
subject to land and water transportation. It is mandatory to report to the 
airline company and obtain approval before air transport. 

* 

Before transportation, press POWER button for two seconds and  

              five LED lights flicker for three times to power off battery.

* 

Do not pile up foreign objects on the top of battery. Four batteries 

               at most can be piled up.
* 

Maintain original packaging and keep labels complete and    

               recognizable. 
* 

Prevent from direct sun exposure, rain, condensation and 

               mechanical damages.
* 

The battery is current qualified for land and sea transport. As respect 

               to air transport, the battery is subject to mandatory certificates.

* 

During transportation, put battery flat, do not have battery stand 

               on or lean against the floor to avoid possible crash.
* 

Maintain temperature between -20℃ to 45℃ during the 

               transportation.
* 

Prohibit mixing up with explosive, inflammable or toxic objects.

* 

Use van-type vehicle including container and metallic van-type 

               vehicle. Platform vehicle and convertible are prohibited.

Содержание GBLI 6532





















Отзывы: