Group Dynamics SD205C, Руководство по обслуживанию

Страница: 15 / 60

14
Once in position, adjust the leveling legs of the dryer
until it is level from left to right and from front to
back. The leveling legs must remain firmly on the
floor and the dryer should not rock. The maximum
slope of the dryer from left to right or from front to
back should not exceed 2,5 cm (1 inch). If the dryer
is not level, and if the slope exceeds 2,5 cm (1 inch),
a load may not tumble properly and internal sensors
may malfunction. Note: Other sections of this
manual also provide important information
concerning the placement of and clearances for your
dryer. Please review this entire manual before
To ensu re that the dryer provides optimal drying
performance, it must be level. To minimize
vibration, noise, and unwanted movement, the
floor must be a perfectly level, solid surface.
NOTE: Adjust the leveling feet only as far as
necessary to level the dryer. Extending the
leveling feet more than necessary can cause
the dryer to vibrate.
WARNING
w
Use an adjustable or open ended spanner to
turn the leveling feet. Turn clockwise to raise
the dryer or counter clockwise to lower it
Raise or lower the leveling feet until dryer is
level from side to side and front to back.
Make sure that all 4 leveling feet are in firm
contact with the floor.
All four leveling feet must rest solidl y on the
floo r. Gently push on the top co rne rs of the
dryer to make sure that the dryer doe s not
rock f rom co rner to co rner.
If you are installing the dryer
pedestal, you must use the leveling feet on the
pedestal to level the dryer. The dryer leveling feet
should be fully retracted.
Leveling Feet
Position the dryer in the final location. Place
a level across the top of the dryer.
on the optional
STEP 2 LEVELING the Dryer.
www.groupdynamics-laundry.com
sales@groupdynamics.lv