Group Dynamics SD205C Скачать руководство пользователя страница 5

Страница: 5 / 60

IMPORTANT SAFETY INSTRUCTIONS

Your Safety and the safety of others is very important.

You will be killed or seriously injured if you don’t immediately follow instructions.

You can be killed or seriously injured if you don’t follow instructions.

We have provided many important safety messages in this manual and on your appliance.
Always read and obey all safety messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER,
WARNING or CAUTION. These words mean:

READ ALL INSTRUCTIONS BEFORE USE

For your safety, the information in this manual must be followed to minimize the risk of

fire or explosion, electric shock, or to prevent property damage, Injury to persons, or death.

DANGER:

WARNING:

WARING

You may be slightly injured or cause damage to the product if you do not follow

instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.

CAUTION:

www.groupdynamics-laundry.com

[email protected]

Содержание SD205C





























































Результаты поиска

Содержание SD205C

Отзывы:

Похожие инструкции для SD205C

Бренды по названию

Популярные бренды

Group Dynamics SD205C, Руководство по обслуживанию

Результаты поиска

Содержание SD205C

Отзывы:

Похожие инструкции для SD205C

Бренды по названию

Популярные бренды