Grosvenor sateon ADVANCE, Руководство по началу работы

Страница: 9 / 24

Page 9
MAC ADDRESS
0001CE20001
SAT-ADV-C-MLT-00000001
Tamper
1 2 3 4
Rev
Load/Clear
Status
Reset
!
!
Optical
Tamper
MP 0V GND 12V
8A
MAX
12V 5A MAX
A B S
RS-485
Connect 12V external power supply,
if used. Select the most appropriate
option: either 5A (2.1mm circular
jack) or 8A (4-pin screw terminal). Connect the IP and/or RS485 cable
as required. See page 18 for details.
If using PoE, IP connection will
apply power to the controller.
Snap in Blades. Ensure
all required Blades are
inserted before power
is applied.
For Door Blade
connections, see
page 8. For
I/O
Blade connections,
see page 10.
Run cabling to the enclosure from all
the doors, readers, locks, inputs and
outputs that are to be connected.
The controller can be installed in
a Grosvenor enclosure or a third-
party enclosure.
Attach the enclosure to the wall using
the fixing points. Install the controller
in the enclosure. Connect the physical
tamper.
The built-in optical tamper
operates automatically when the
enclosure is closed.
Connect a 12V lead-
acid back-up battery if
required.
1 2
3
4
5 6
Once power is applied to the
controller it will be visible to the
Sateon Quick Start application.
2
3
4
5
6
Need more information?
gtl.biz/satsw