Grosvenor sateon ADVANCE, Руководство по началу работы

Страница: 22 / 24

Configuring Controllers
Page 22
For RS485 connectivity , configure
controllers as follows:
Give the controller a name. We
suggest using a name that identifies
its location or purpose.
1
Choose the connection mode: Relay to define a Relay controller or 485 Only
for all other controllers in a RS485 chain. Different addressing options appear.
For Relay controllers : define the IP settings and set the baud rate for the
RS485 line (defaults to 19200).
One controller must be configured as a
Relay controller: it acts as a line header
and requires an IP connection as well
as a RS485 line.
All other linked controllers must be
configured as
485 only .
2
3
For 485 Only controllers : choose the managing Relay controller and set the
baud rate (defaults to 19200)
4
1 2
3
4