Grohe 39315000, Руководство по установке

Страница: 17 / 18

1.Installation drawing
2.Detail of product.
Rubber socket
(CF-85GV)
Fixing floor set(KF-2700DV)
Flexible hose
(A-703-5)
Water closet
(Include acessories
and seat cover)
Trap
(T-93V)
Manual for installation and
using papper
Stop valve
(A-703-4)
655
300
20
390
WL
780
140
470
WL
240
100
99.0567.031/ECN 235920/11.15
MANUAL FOR INSTALLATION AND USING
PRODUCT CODE :39316000
Page 1/2
Drainage pipe
Mixture of Cerment/Mortal
Pliers
Mesuring tape
Screw driver Wrench
Driller
3. Tools and equipments.
Tape
4. Install P-trap.
4.1. The distance from floor to top side of drainage pipe is 12-
13mm. Diameter of drainage pipe is 110m and distance from
centre of hole to wall is 300mm (as the figure).
12~13 mm
110
Drainage pipe Ø110
4.2:
- Drill two holes
Φ8
on the floor, to the drainage pipe, as the
figure, after that place a plastic plug (see attachable components)
into the 2 newly drilled holes:
Plastic plug
Cover
Screw
Washer
Mortal or white cerment
4.3: To cover white cement or mortar around the drainage pipe,
place trap over, then fix the trap with floor by the screws.
5. Install the rubber gasket into P-trap.
After the trap has been fixed on the floor,
place the rubber washer on the mouth of
the trap.
Before installation, paste water internal
surface of rubber socket. Open rubber
socket by hand, after that install externial
head of trap.
Note:
Press rubber socket still the end.
6.Install toilet bowl.
6.1: To place the toilet seat on the
trap so that the outlet of the toilet
bowl inserts into the mouth of the
trap:
6.2: To unleash the plastic cap of the screw fixed to the body of
toilet bowl, then fastening it into the seat through 2 holes on the
body of toilet bowl, after tightening the screw, drive the plastic
6.3: In order to wash floor easily and to keep it clean, only use
silicon to plaster into slits around the seat between its bottom seat
and the floor.
Mixture of mortar
Drainage
pipe
Wax ring
4.4: For more option, use wax ring to cover around the drainage
pipe.
The screw shall be fitted with the plastic plug which were inserted
on the floor.