Grohe 39315000, Руководство по установке

Страница: 12 / 18

- 5 -
7
180
190±5
190±5
mm.
7.3
7.1
7.2
318
mm.
45
mm.
8
9
After the above installation, check level of the toilet.
FIX THE TOILET / CHECK LEVEL
Using the floor fixing screw set fix the toilet on the floor.
INSTALLATION THE PLASTIC CONNECTOR INTO THE WALL (P-TRAP)
�.�) Insert the plastic connector into the waste pipe on the
wall up to protruding lenght of ��� mm. as shown in
figures �.�
(If necessary, apply PVC cement solve n t (not supplied)
around the end tip of plastic connector t o be fitted
with the waste pipe to strengthen the c onnection joint
between waste pipe and plastic connect o r)
Note :
Drain out water from pipe before fixing stop valve and w a ter supply house .
WATER SUPPY ASSEMBLING
Attach the water supply hose properly unto the water
control valve as figured shown, and then tighten snugly
by hand. Attach the water supply hose properly to the
stop valve by turning clockwise.
�.�) Lift the VC and aim the outlet into the connector’s
opening then gently push the VC towards the wall until
connector and VC fits properly.
NOTE :
Nov.2015
Rev.03