9
OM-TDH
OM-TDH
9
1. To Stop Kettle Heating
a. Turn the thermostat dial to OFF.
b. Turn the toggle switch OFF.
c. For a prolonged shut-down:
1. Follow the procedure above.
2. Turn the manual gas valve OFF (handle at
right angle to gas line).
3. Disconnect the unit’s electrical power.
3. To Relight Kettle
a
Close main gas supply valve.
b. Set on-off switch to OFF.
c. Set thermostat to OFF.
d. Wait five minutes, then proceed as directed under
To Start Kettle Heating
.
4. If electric power fails, do not attempt to operate
the unit. When power is restored, proceed as
directed in
To Start Kettle Heating
.
5.
To Transfer Product or Empty Kettle
:
TDHC Kettles:
The kettle body is tilted using the crank tilt handwheel.
Turning the crank clockwise tilts the kettle body;
counter-clockwise returns it to an upright position. The
kettle body will remain in any tilted position.
TDH Kettles:
The kettle is designed to be tilted in a controlled
manner. Grasp the insulated plastic ball firmly.
Maintain a firm grip on handle when tilting, keeping
kettle body in a tilted position or SLOWLY returning the
kettle body to an upright position.
WARNING
AVOID ALL DIRECT CONTACT WITH HOT FOOD OR
WATER IN THE KETTLE. DIRECT CONTACT COULD
RESULT IN SEVERE BURNS.
TAKE CARE TO AVOID CONTACT WITH HOT KETTLE
BODY OR HOT PRODUCT, WHEN ADDING
INGREDIENTS, STIRRING OR TRANSFERRING
PRODUCT TO ANOTHER CONTAINER.
CAUTION
DO NOT OVERFILL THE KETTLE WHEN
COOKING, HOLDING OR CLEANING. KEEP
LIQUIDS 2-3” (5-8 cm) BELOW THE KETTLE
RIM TO ALLOW CLEARANCE FOR STIRRING,
BOILING PRODUCT AND SAFE TRANSFER.
WARNING
WHEN TILTING KETTLE:
1) WEAR PROTECTIVE OVEN MITT AND
PROTECTIVE APRON.
2) USE DEEP CONTAINER TO CONTAIN AND
MINIMIZE PRODUCT SPLASHING.
3) PLACE CONTAINER ON STABLE, FLAT
SURFACE, CLOSE TO THE KETTLE.
4) STAND AWAY FROM POUR PATH OF HOT
CONTENTS.
5) POUR SLOWLY, KEEP CONTROL OF
KETTLE, AND RETURN KETTLE BODY
SLOWLY TO UPRIGHT POSITION AFTER
CONTAINER IS FILLED OR TRANSFER IS
COMPLETE.
6) DO NOT OVERFILL CONTAINER. AVOID
DIRECT SKIN CONTACT WITH HOT
CONTAINER AND ITS CONTENTS.
6. Use of Common Accessories
Lift-Off Cover
a. As with stock pot cooking, an optional
lift off cover will speed up the heating of
water and food products. A cover helps
retain heat in the cooking vessel and
reduces the amount of heat and
humidity released into the kitchen. Use
of a cover can reduce some product
cook times and help maintain the
temperature, color and texture of
products being held or simmered for
extended periods.
b. Make sure the plastic ball handle is
secure on the lift off cover before using.
ALWAYS use the plastic handle to
place or remove cover from the kettle.
Wear protective oven mitts and a
protective apron.
c. When putting the cover on the kettle,
position it on top of kettle rim, with its
flat edge facing the pouring lip.
d. When removing cover:
1) Firmly grasp plastic handle
Содержание TDH
Страница 24: ...24 OM TDH OM TDH 24 Parts List TDHC Units Only...
Страница 31: ...31 OM TDH OM TDH 31 115 VOLT SUPPLY Schematic TDH TDHC...
Страница 34: ...34 NOTES OM TDH...
Страница 35: ...35 OM TDH NOTES...