Groen BPM-30S, Руководство оператора

Страница: 4 / 40

4 OM-BPM/BPP-G
Equipment Description
Groen™ Gas-Heated Eclipse™ Ergonomic Tilting
Braising Pans provide a stainless steel pan
equipped with patented heat transfer fins,
burner/combustion chamber, hand-operated or
electric powered tilting mechanism, thermostatic
controls, and hinged cover. Eclipse serves as
braising pan, griddle, fry pan, oven, kettle, bain-
marie and food warmer/server, can be adapted
for use as a non-pressure steamer and can be
used to stir-fry, reheat and saute foods.
The pan body is made from heavy-duty stainless
steel welded into one solid piece, with a polished
interior and exterior. A pouring lip is welded to the
front wall. The cooking surface is a stainless steel
clad plate fitted with welded heat transfer fins
which assure uniform heat transfer over the entire
surface. The gas burner/combustion chamber
supplies the heat.
An easily operated worm and gear mechanism tilts
the pan and provides precise control for pouring or
dumping the contents of the pan. This hand-wheel
controlled mechanism is located in a stainless
steel console to the right of the pan body. For BPP
models with electric power tilt, a switch operates
an electric motor that starts and stops the pan tilt
smoothly. To assist cleaning, the pan body can be
tilted past the vertical position. When the pan is
tilted, the burners shut off automatically.
The thermostat provides automatic control of
cooking temperature. Operating the thermostat
dial on the front of the control console turns the
heat on or off and sets the pan temperature.
A vented, heavy gauge, one-piece, stainless steel
cover with a condensate drip shield on the rear
edge is standard on the Braising Pan. A fully
enclosed, torsion bar type counterbalance
provides easy operation to open the cover and to
maintain it open at any position. The cover opens
to the back and is hinged to the frame, so it moves
independently of the pan body.
The braising pan is mounted on an open-leg frame
fabricated from tubular stainless steel.
Models BPM and BPP have an ignition system that
uses electronic spark ignition. Optional models
BPM -30GS and BPM-40GS have a standing-
flame pilot light that ignites the main burner.
Model
Pan Dimensions
Ignition
L to R Depth
BPM-30G 26.25" (667mm) 10" ( 25mm) Spark
BPP-30G 26.25” (667mm) 10" ( 25mm) Spark
BPM-30GS 26.25” (667mm) 10" ( 25mm) Flame
BPM-40G 35.75” (908mm) 10" ( 25mm) Spark
BPP-40G 35.75” (908mm) 10" ( 25mm) Spark
BPM-40GS 35.75” (908mm) 10" ( 23cm) Flame
Options available with these models are:
1. Fill faucet with swing spout. (Left or right mounted)
- specify single or double pantry
2. Fill faucet with 48" or 60" spray hose assembly
(left or right mounted) - specify single or double
pantry
3. Caster mounting kit.
4. Flanged Feet
5. Fold-down work tray (pan support) mounted on
right side.
6. 2” Tangent draw-off (Factory-installed must be
indicated on initial order)
7. Steamer Insert set.
8. Steamer Pan Carrier.
9. Quick gas disconnect with restraining cable.
10. Pouring Lip Strainer.
11. Strainer for 2" TDO valve.
Performance Data
Optional Tangent Draw-Off
MODELS FIRING RATE
BPM-30G,BPM-30GS,
BPP-30G
104,000 BTU/hr
BPM-40G, BPM-40GS,
BPP-40G
144,000 BTU/hr