Groen 2TRI-RES-20G, Руководство по обслуживанию

Страница: 31 / 44

PART NUMBER 152797 REVISION A
CALL 888-994-7636 FOR TECHNICAL SUPPORT 31
5.11 Burner
The entire combustion chamber is constructed as a slide out
drawer to remove, follow the instructions below.
Removal
1a. Disconnect the flexible gas lines and moving them out of
the way.
See Below;
#1 – Burner Supply Line
#2 – Pilot Supply Line
#3 – Burner Supply Line
#4 – Burner Supply Line
#5 - Runner Tube Supply Line
1b. Disconnect power and gas supplied to the unit.
2. Remove the left side panel by removing the three exterior screws.
3a. Remove the side access plate by removing the two 10x32 nuts.
3b. Remove the four (4) bolts that attach the damper and com-
bustion chamber plate and pull out the drawer.
4. Unplug the HSI and flame sensor.
5. Remove the 5-1/4” screws on the holding plate near the
ignition tube and the two on the bottom of the holding plate.
6. Loosen the 3/4” compression fitting on the ignition tube
and move it toward the base.
7. Slide the burner out the left side of the unit.
assembly/dIsassembly
1 2 3 4 5
NOTE
Shut off power and gas supply
before removing!!!!!