Groen 2TRI-RES-20G, Руководство по обслуживанию

Страница: 19 / 44

PART NUMBER 152797 REVISION
A
CALL 888-994-7636 FOR TECHNICAL SUPPORT 19
Interior Cleaning
NOTE:
Clean the unit daily or as residue builds upon the
bottom of the oven cavity.
1. Turn off the unit by pressing once on the current or last
operating mode. For example if you are in steam mode press
STEAM button once more so that the red indicator light is off.
NOTE: The unit cannot be operated in the CLEAN mode while
the oven is in operation.
2. Press CLEAN button. The LCD display will instruct you to
empty the oven. (Display reads OPEN DOOR AND REMOVE
RACKS).
3. Open the door and remove all food pans, oven racks, the
two rack support on side and the two halves of steam baffle
located on the bottom of the oven. (When door is opened,
display reads SPRAY CLEANER AND CLOSE DOOR)
4. Once these are removed, spray a detergent/cleaner on
interior walls.
NOTE: use a cleaner that is safe for oven use and will degrease
in presence of steam.
5. Close the door (Display reads CLEAN MODE SOAK TIME).
6. The rest of the clean cycle is automatic and you have to do
nothing but leave or wait till clean cycle is over.
7. If the oven is hot when the clean cycle has started the
display will read OPEN DOOR TO COOL OVEN. Open the door
(display reads COOLINg). When the oven has cooled sufficiently
the display reads CLOSE THE DOOR. Close it. The clean cycle
continues with the soaking period.
8. After soaking the oven interior will be automatically sprayed
with rinse water to remove the cleaner. At anytime during the
clean cycle the door may be opened to spray more cleaner on
the cavity walls. When the door is closed the cycle resumes with
the soaking period.
9. After rinse the oven will drain the water and then go into a
second rinse cycle.
10. After the second rinse cycle the oven will drain and the
display will read CLEAN COMPLETE TIME LEFT for a minute,
then it will shut completely down.
11. At this time you may open the door and leave it open to air
dry oven interior.
12. To repeat the clean cycle, turn POWER switch to ON, and
press CLEAN again.
13. Power may be turned off at any time during the clean cycle.
When power is turned on again the display reads PUSH CLEAN
TO FINISH CLEANINg. Push the CLEAN button to resume
cleaning (no other cooking mode buttons will operate until the
clean cycle is complete).
InstallIng, cleanIng and testIng